TOUGH, FAST SETTING, NO-RUN FORMULA.
Introducing our TWS Adhesive designed specifically for effortless installation of tyre decals. This formula boasts a thicker and more manageable consistency, ideal for precise application. You can count on this adhesive to create long-lasting results in a matter of seconds, as its clear formula dries in just 10-45 seconds and firmly adheres to the tyre surface. Our unique formula has been engineered to withstand the rigors of daily use, including drops and impacts, and it offers superior weather resistance compared to other adhesives on the market. Plus, with the inclusion of a soft bottle, our TWS Adhesive is now easier to use than ever before, replacing our previous gel product.
It's important to note that while our TWS Adhesive is a superior product, it can only do so much on its own. To ensure optimal results, we highly recommend properly preparing the tyre surface before application. This includes thoroughly cleaning and drying the surface to remove any dirt, debris, or oils that may hinder the adhesive's ability to grip. For additional assistance, we encourage you to reference our installation guide which provides helpful tips and tricks to ensure a successful application.
To use our TWS Adhesive for optimal results, follow these steps:
- Apply a moderate amount of adhesive to the back of the decal to ensure a strong bond, taking care not to over-apply as this may slow down the cure speed and cause oozing.
- Spread the adhesive evenly on the back of the decal using the nozzle tip.
- Apply moderate pressure to the decal for 30 seconds using your fingertips or the palm of your hand, or use masking tape to secure it to the tyre.
- After application, peel off the protective film and check the edges for any lifting. If any edges lift, apply more adhesive to that area.
It's important to note that the glue can only do so much, and proper preparation of the tyre surface is crucial to achieve a strong bond. For detailed instructions on how to install our Tyre Stickers, please refer to our installation guide at https://tyrewallstickers.com/pages/how-to-install-permanent-tyre-lettering.
Our TWS Adhesive is designed with the following features:
- Thick Glue Liquid: The gel formula offers superior control during application.
- Impact Tough: Formulated for impact resistance and strength.
- Fast Setting: Dries in just 30 seconds, without requiring any gripping.
- Chemical/Solvent Resistance: This adhesive exhibits excellent resistance to most oils and solvents, including motor oils, leaded petrol, ethanol, propanal, and freon.
Our TWS Adhesive has a viscosity of 3000 cps and a minimum shelf life of 1 year from the production date when stored in a cool environment.
Please note that this product is already included in our kits, which is convenient if you are purchasing our Tyre Stripes or Flares and require additional adhesive.
*Please note that the bottle in the picture is for illustrative purposes only, and the bottle you receive may look different.
- Avoid contact with eyes and skin. In case of contact, flush the affected area with water and seek medical attention.
- Use in a well-ventilated area and avoid inhaling the fumes.
- Keep out of reach of children and pets.
- Do not ingest the adhesive.
- Store the adhesive in a cool and dry place away from sources of ignition and direct sunlight.
- Follow the manufacturer's instructions and recommendations for safe handling and disposal.