Fill out the information below to find out what size decal you should be ordering.
In some cases, you may want to remove the Tyre Lettering. To do this you will need to purchase an adhesive De-Bonder
STEP 1: Shake bottle well before use
STEP 2: Apply the De-Bonder around the edge of the lettering and let the solution penetrate into the adhesive for 1 hour. Ideally you want to create a barrier trapping the de-bonder so it doesn't run off the tyre.
STEP 3: Scrape away the glue and sticker from the tyre, in some cases you might need to apply more solution. If done correctly, the adhesive should turn into a gum-like consistency.
If you are reapplying Tyre Stickers, clean the area well with Acetone or Isopropyl Alcohol, otherwise our Adhesive won’t work.
About our TWS De-Bonder (Discontinued)
TWS De-Bonder. Ideal for fast and easy removal of our permanent Tyre Stickers.
This product is thixotropic and in the bottle, the material can seem to be solid, this is not the case, when agitated it will revert to a fluid (if left standing, tap the bottle before using. If the nozzle is blocked remove the nozzle). The reason for the material being ‘thixotropic’ is when dispensed it will revert from a fluid state back to a gel, this is so the De-Bonder remains in place on the ‘adhesive’, a fluid would run off and the material needs to stay in situ for it to work. No flammable solvent or water in the material.
Works by swelling the adhesive into a gum-like consistency making the adhesive easy to remove.