Tyre lettering
8 lettering decals — enough for 4 tyres
Your chosen design and colour.
If you have any questions please send us a direct message on WhatsApp
Photo shows an example installation. Your actual kit and decal size may vary depending on the options selected.
£84.99 GBP
Ordering for a motorbike? Use separate front and rear lettering sizes.
Inside your kit
Your lettering, adhesive and installation guide, together in one kit.
8 lettering decals — enough for 4 tyres
Your chosen design and colour.
1 bottle of adhesive.
For installing your tyre lettering.
Installation guide
Step-by-step instructions for fitting your kit.
Included with UK orders
For preparing the tyre before installation.
DIY Install Guide
A closer look at fitting our tyre lettering. A full detailed installation guide comes in all of the kits, please read it before you begin.
Find the centre part of the wheel and line up the two decals so they are exactly opposite each other.
Use 120grit sandpaper or a flap disc attachment to create a light key on the tyre wall.
Use our tyre prep cleaner to thoroughly clean the surface, you're after a clean grippy surface with no oils present.
Apply adhesive to the first letter to tack it down in place and glue it down in place, then apply adhesive to the back of 2-3 letters at a time
Press and hold down the decal for 30 seconds, making sure to get full pressure on the full decal.
Repeat for the remaining letters. For pinstripes line them up in the middle, tack down 3cm on each side and then glue 10-15cm at a time following step 5.
Remove the transfer tape after install, do this fairly soon because if you have overspill it will start to dry to the top of the transfer tape, be careful not to get any excess glue over your decal.
Leave to cure for 1hr before driving away, don't let the decals get wet whilst they dry otherwise the glue will react to the water and crystalise.
Admire your hard work and take some photos! Don't forget to tag us and leave a nice review when prompted!
Our kits are designed for DIY installation, but we understand mistakes can happen. Take your time and follow the full installation guide carefully for a trouble-free install. If you're unsure about a step, contact us before continuing.
The difference is in the detail
Not all tyre lettering is made the same. From the fit to the finish, every detail matters.
Custom fit
Every kit is custom made to fit the tyre sidewall it's ordered for. Your tyre measurements shape the finished design, rather than relying on a one-size-fits-all strip.
1mm Thick. 5-layer construction
Five layers combine woven reinforcement with a UV-protective colour coating. Designed for flexibility, strength and resistance to cracking and fading.
A cleaner finish
Each letter is individually cut, with no continuous black rubber surround connecting the design. Clear transfer film holds everything in position during fitting, then peels away.
Prepared to bond
The textured back provides a prepared surface for our tyre adhesive, helping each letter bond securely when the tyre is correctly prepped.
UK business · Since 2021
Three years of research and development came before our UK launch in 2021. That groundwork continues to shape the kits we make today.
Here to help
Need help choosing, fitting or looking after your lettering? We're here to help. If a letter comes loose, get in touch so we can understand what happened and help put it right.
Designed to last the life of your tyre when correctly installed and cared for.
Good to know
A little guidance for fitting, caring for and enjoying your tyre lettering. Need a hand? We're here to help.
Enter your tyre sizes in the configurator. We check these before making your kit and will amend the order if we spot a potential fit issue. If you're unsure before ordering, get in touch and we'll help.
Yes. Tell us about design changes in the order notes. If you'd like a preview before placing your order, contact us. For bespoke designs, we'll email a proof before production, so please provide your email address at checkout. If you don't reply within 2 working days we will continue with the design we have made.
Photos show example installations. Lettering size and the finished appearance depend on your tyre dimensions, chosen colour and selected options.
Our kits are designed for DIY installation. Read the full guide before starting, prepare the surface carefully and allow the stated curing time. Lightly scuffing the fitting area is optional. If you're unsure about a step, contact us before continuing.
Follow the cleaning and care instructions supplied with your kit, and avoid tyre-shine products. We also offer a dedicated tyre-sticker cleaner.
View tyre-sticker cleanerGet in touch with your order details and a clear photo. We'll help you work out what happened and discuss the best next step.
Order ReplacementsThe lettering is designed to be permanent. If you need to remove it, the safest option is to lightly grind off the lettering. Simply pulling the decal off can damage the tyre wall
We recommend installing our tyre decals on tyres that have done 1000 miles or more, to read a more in-depth explanation of this visit our guide.
Read more